|
|
Position indikator behind the wall
Slavíček, Radek ; Friedl, Martin (referee) ; Szabó, Zoltán (advisor)
This bachelor´s thesis is focused on explaining of basics of electromagnetism and principles of resonant circuits. These solutions are used for design the indicator opposite position. The next step of document is solution by using magnetic field for design of transmitter and receiver antennas for electronics devices. The final products are solved as the best way for the design. Development process is described step by step in individual chapters.
|
|
|
Optimization of modal properties of the body in the air flow
Matějka, Jan ; Švancara, Pavel (referee) ; Skalka, Petr (advisor)
The bachelor thesis deals with dynamic analysis of the rod body, which is excited by the Karmán vortices. In this thesis a method of countermeasure is also verified, which could be possibly used in order to supress the state of resonance in the body and which could minimalize the influence of the Karmán vortices on the structure. This method consists in change of the mass in specific parts of the body in order to change modal properties of this body. The main goal of the thesis is to find suitable configurations of the mass distribution depending on air flow velocity for purpose of minimalization the influence of the Karmán vortices on the construction. This is achieved by optimization of modal properties. The optimization is based on results of harmonic analysis and is considering possibility of practical use.
|
|
|
Optimalization of Exhaust Manifold for SI Engine
Prášek, Martin ; Beran, Martin (referee) ; Svída, David (advisor)
The master thesis is focused on optimizing existing or proposal for a new exhaust tracts on the Volkswagen Polo moving series rally-cross A1 division. The car is powered by concern, water-cooled, atmospheric engine capacity 1599 ccm. To achieve the objectives of the lessons are applied as a theoretical nature (analytical calculation), especially the advanced approaches of the software environment from the firm Lotus. Exhaust treatment systems are designed to suit all rules FIA Sports Association.
|
|
|
The comparison of acoustic properties of guitars from the same product line
Trávníčková, Hana ; Indrák, Michal (referee) ; Jirásek, Ondřej (advisor)
This work is dealing with acoustic features of Furch guitars. In theoretical introduction is possible to find an information about basic characteristics of a tone. Following chapter about acoustic guitars is dealing even with mostly used types of woods for their manufacturing. In special chapter are described spectres of signals, LPC analysis, sound radiation of instruments and Chladni figures. Mentioned terms have been evaluated from measurements and are available in practical part of this work also including description of implementation of the measurement. As an output of this work is a comparison of acoustic features of measured guitars, their colours and modes.
|
|
|
Wireless transfer of energy
Varga, David ; Koňas, Petr (referee) ; Steinbauer, Miloslav (advisor)
ork tie together on first project, in which the was designed apparatus for tests wireless transmission energy. Antenna was synthesized and theoretically optimized for experimental operation, in which the will performed series measuring. In first part is practical description of realization proposal. It consists of circuital solution, proposal measuring workplace and mechanical construction with illustration photographs of arrangement. Second part includes results of performed measuring. These measuring will divided by three basic groups: in first group will by testing feature one’s antennae, in second group will series transmission measuring power gain, and in third group will photographed shape of field, and comparison with simple simulation finite difference method. Third part summarises results from measuring, and prepares consecutive balancing visualisation project, which is of thematic bent on chosen aspects theoretical hypothesis and effected experiments.
|
|
|
Magnetic fields for medical experiments
Punčochář, Marek ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
his work deals with the creation of magnetic fields for medical experiments. The first part deals with different types of coils, with a focus on the Helmholtz coil. Longer be described here how the winding coil-shaped mats, calculate the length of the field lines. After the work is focused on the involvement of the coil into the circuit.
|
|
|
Portable source for induction heating
Nevřela, Tomáš ; Martiš, Jan (referee) ; Knobloch, Jan (advisor)
The aim of this work is to realize and test a prototype portable source for induction heating of small parts. The project contains a theoretical basis of resonant circuits and induction heating. The device design is based on simulation results from the FEMM program, with which a focussing coil for induction heating has been designed. The parts of the thesis are the realization of the designed device, its putting into operation and the programming of the control.
|
|
|
Indikator position behind the wall
Pecha, Václav ; Marcoň, Petr (referee) ; Szabó, Zoltán (advisor)
The work sums up the basic measurement principles for different kinds of searching devises. It deals with measurement using resonance. The feature of resonance and measurement techniques are described to set the location of the radiating circuite. The work contains the design of a locator of position behind a wall itself as well as the concrete switch connection, schema and description of receiver and emitter in the circuit.
|
|
| |
|
|
Design of a technological structure with use of BIM methodology
Brodecká, Denisa ; Bukovská, Pavla (referee) ; Vild, Martin (advisor)
Diploma thesis deals with the design of load-bearing steel structure for hot vapor air cooler. Part of this diploma thesis is also modal analysis of the construction and subsequent inspection of eigenmodes for eigen frequencies close to frequencies of the ventilator, to assess the resonance. The thesis contains of the design and check of structure elements in the computational software, including hand-done static calculation of chosen elements. Five joints are solved using Idea Statica and five hand-done checks of sub-connections, including design and solution of foundation pad. Next part of the outcome of this thesis is creation of digital construction model, including drawings. The Tekla Structures software was used to create DiMS.
|
guest ::
